Продукти за rff hdl 10 a (33)

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Concentrated superplasticizer for high-quality precast and ready-mix concrete with good surface finish. Concrete with special properties. Concrete for road decks and bridges. Strong increase of workability and/or reduction of w/c-ratio, gives homogenous concrete with good workability and high early strength development.

Réparation, échange et remplacement des systèmes robotiques ABB et boîtiers de commande ABB IRC5 et S4 Depuis début 2018, nous proposons des réparations de remise à neuf ainsi que des pièces de rechange et détachées pour les boîtiers de commande portatifs robotiques issus des gammes de produits IRC5, IRC5P, S4, S4+, S4C+, S4P ainsi que S4P+ du fabricant ABB. Pendant le processus de réparation, nous veillons, outre les pièces d'origine du fabricant, à monter des composants améliorés par rapport à ce dernier. Outre l'utilisation des pièces autorisées par le fabricant ou le législateur, nous testons les appareils de commande manuel ABB remis à neuf avec des robots IRB originaux ABB dans des conditions qui correspondent à votre environnement de travail réel. Nous pouvons ainsi vous proposer ici une garantie de 24 mois* sur les boîtiers de commande portatif complet ABB.

iglidur® J2 Environmentally friendly. The growing demand for PFOA-free iglidur® materials* is met by igus® with an ongoing review of all iglidur® materials – the list of already PFOA-free iglidur® materials is thus getting continuously longer – and a new iglidur® material: iglidur® J2. iglidur® J2 is available as cylindrical bearings and plain bearings with flange. Good mechanical properties, robust Low-priced Good resistance to media Lubricant- and mainteance-free

Der Premium-PU-Dichtstoff Eigenschaften: - Siliconfrei - Anstrichverträglich nach DIN 52452 (nicht überstreichbar) Keine Wechselwirkungen mit vorhandenen und angrenzenden Beschichtungen - Überstreichbar / Überlackierbar - bitte Anwendungshinweise im technischen Datenblatt beachten Optische Anpassungen und Schutzbeschichtung möglich - Gute Witterungs- und Alterungsbeständigkeit Für langlebige Anwendungen im Innen- und Außenbereich - Härtet blasenfrei aus Für optisch anspruchsvolle Fugen geeignet - Dehnspannungswert bei 100 % (ISO 37, S3A): 0,3 N/mm² Anwendungsgebiete: - Außenwandfugen nach DIN 18540-F - Dehnungs- und Anschlussfugen an Beton- und Porenbetonfertigteilen - Abdichten von Fassaden, Metallbaukonstruktionen, Fenster- und Türanschlüssen, Flachdachbrüstungen

LUBRIFIxx Schmierstoffgeber Laufzeit: 1 Monat

Der GUARD-F12 ist ein EN50155 Class Tx zertifizierte Firewall/Rouer für den Einsatz in Eisenbahn-Anwendungen. Das spezielle GUARD Gehäuse erlaubt den Einsatz in rauer Umgebung, ohne die Notwendigkeit von Lüftern oder Lüftungsöffnungen, und kann auf einer 35 mm DIN-Schiene, in einem Rack oder an der Wand montiert werden. Das kompakte Gehäuse bietet ausreichend Platz für zusätzliche Peripheriegeräte. Die Betriebstemperatur reicht von -20°C bis +60°C und optional sogar -40°C bis +85°C, ohne Lüfter oder zusätzliche Öffnungen. Der interne miniPCIe Slot ermöglicht verschiedene Erweiterungen wie WLAN, GPRS, usw.. Wichtige Eigenschaften sind: Grosser Eingangsspannungsbereich (8 - 36 VDC) 3 Fast-Ethernet-Ports mit M12-Steckern USB- und SD-Schnittstelle (optional) Optional mit 3 GigE Ports

Leistungsstarke Systemkapazität: Überwachung von bis zu 500 Sensorkabeln; Erkennung von mehreren Lecks gleichzeitig; Touchscreen-Schnittstelle; TCP/IP- und MODBUS/JBUS-Anschluss

Discover the excellence of Horizont Oil's HDPE Granules, where strength meets versatility in a sustainable blend. Our premium HDPE granules redefine industry standards, offering unparalleled durability and adaptability for a wide range of applications. Engineered with a commitment to sustainability, these granules are not just a choice; they are a statement towards a greener future. Elevate your manufacturing processes with the reliability and eco-consciousness of Horizont Oil's HDPE Granules — a cornerstone for your industry success.

HVD Mineral hydraulic oil for industrial and mobile systems that are subject to major temperature fluctuations and/or work under very high pressures. Benefits: High viscosity index. Good shear stability. Anti-wear additive on the basis of stabilised zinc. Excellent oxidation resistance. Very high filtrability. Very low pour point.

AFR-RB25 LD x CD x L x e:16 x 8 x 2 x 0,8, 16 x 8 x 2 x 1, 16 x 8 x 2 x 1,5 ACIER kg/m²:3,3, 4,1 ALUMINIUM kg/m²:1,4, 2,1 Formats maxi Panneaux mm:LD1000/1250/1500, CD > 3000 Epaisseur apparente (interne) mm:2 (int.) Vide frontal % Vide maxi:45 env.

Zement-Basis Wetterbeständig Spannungsarm Atmungsfähig

Flexible single-component mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity. Its flexibility allows it to cover microcracks that form in concrete subjected to deformation. Strong adhesion, impermeability, no shrinkage and excellent workability. Maximum thickness per layer:1mm Minimum total thickness:2mm Consumption:1.25 kg/m2 and mm thickness

Superfine talc, manufactured and developed specifically for the nucleation of polymers. The presence of a large amount of fine particles improves the crystallization of the resin, thereby greatly improving the bending modulus, HDT (temperature resistance - ISO 75-1) and transparency.

HF LONG RANGE LESER, PREMIUM • 180 x 320 x 110mm (LxBxH) • Mögliche Antennen Konfigurationen: - ID ISC.ANT310/310 Loop Antenna - ID ISC.ANT800/600-DA Loop Antenna • Schnittstellen: RS232, RS485, USB 2.0, Ethernet (TCP/IP), USB-Port für WLAN-Stick oder externen Speicher • Spannungsversorgung: 24 V DC • Transponder: ISO15693, ISO18000-3-Mode1 • Einsatzbeispiele: - Identifizierung von Akten und Dokumenten - Handel; Identifizierung von Verleihgütern - Verleihsysteme; Bibliotheken - Industrie • Besondere Merkmale: - Antikollision Funktion - FEIG ISO Host Mode - Buffered Read Mode (BRM) - Notification Mode - Scan Mode

Specifications Aluminium extruded body with electrostatic powder coated Electrostatic powder coated aluminium die cast end caps Mid Power LED light source LED (L80/B10) + DRIVER life time more than 50.000 Hours Tempered (clear and frosted) glass cover with IK10 grade High efficient PMMA, Opal, semi-transparent or transparent diffuser option Input Voltage: 198-264V AC, 176-280V DC, 50-60 Hz Operating Temperature (Ta): -400C / +700C Applications Zone 2 - Zone 22 applications Industrial Facilities Oil Rafineries Gas Stations Petrochemical Facilities

The performance of a true cure, hardener and densifier in a single application.

OEM Spare Parts for Concrete Pumps

Die Type 261 ist ein reines, ölfreies, modifiziertes PTFE-Pulver, welches mit einem schnell und vollständig verdunstenden Lösemittel auf die zu schmierenden Stellen aufgetragen wird und dort einen trockenen, haftenden Schmierfilm bildet. Die Type 261 fleckt nicht, ist unsichtbar und – wichtig für die Holz- und Möbelindustrie – durchbeizbar.

Tissu 100% LIN, arm ure reps 2/1, 520g/m2, 150cm, NonIm per Principales utilisations:baches, bagagerie, maroquinerie

F30 Fluor Powder Cod. Art:F30 Ean Code:8022937433470 Temperatura aria:-2C°... -7C° Umidità aria:H° > 50% Tipo di neve:neve artificiale, neve in trasformazione Umidità neve:umida Applicazione:applicare a caldo T° ferro 170C°

50.5002.00 - PVC-Kleber

PNEUS-PIRELLI 24

Ce produit a été retiré de notre gamme. Liste

HDPE HM-CRP 100 Black is a high density polyethylene.

LF IsoP 58 - 1000L LF IsoP 58 - 205L

High-performance superplasticizer for medium slump and high slump concrete with good slump retention for precast and ready-mix concrete. Very strong increase of workability and/or reduction of w/c-ratio; good slump etention; high early strength development.

High-performance superplasticizer for medium-slump, high-slump and self-compacting concrete (SCC) with high early-strength for concrete precast applications. Very strong increase of workability and/or reduction of w/c-ratio; high early-strength development; good slump retention.

High-performance superplasticizer for medium slump and high slump concrete with good slump retention and very high early strength for precast application. Very strong increase of workability and/or reduction of w/c-ratio; very strong plasticizing effect even with high amounts of fines; high increase of early strength.

Il s'agit d'un conglomérat d'agrégats de marbre concassés, d'agrégats légers et de ciment, ensachés à l'état sec afin que l'utilisateur, en le mélangeant avec l'eau indiquée, obtienne un béton de faible densité de qualité adéquate et constante. Résistance à la compression:>20 N/mm2 Densité de la poudre:1300 Kg/m2 Densité apparente:1600 Kg/m2 Consistance du béton frais - tassement:60-90 mm Taille maximale des granulats:10 mm